Best Practices Guide For Radio, Cleaning And Disinfecting During This Crisis
This "Best Practices Guide" describes the general procedures for cleaning and disinfecting two-way radios, wireless devices, body-worn cameras and accessories based on current and best understanding of radio hygiene. Per global health authorities, removing germs, dirt and impurities from surfaces lowers the risk of spreading infection. Using chemical disinfectants may kill germs that remain on surfaces after cleaning, which further lowers the risk of spreading infection.
Information from the WHO website:
Information from the US CDC website:
- Apply 0.5% detergent-water solution with a cloth, then use a stiff, non-metallic, short-bristled brush to work all loose dirt away from the device. Use a soft, absorbent, lintless cloth or tissue to remove the solution and dry the device.
- Make sure that no solution remains entrapped near any connectors, cracks or crevices.
- Devices may be disinfected by wiping them down with over-the-counter isopropyl alcohol (rubbing alcohol) with at least 70% alcohol concentration.
- When cleaning with isopropyl alcohol, the alcohol should never be applied directly to the device. It should be applied to a cloth, which is then used to wipe down the device.
- The effects of certain chemicals and their vapors can have detrimental effects on plastics and the metal plating.
Do not use bleach, solvents or cleaning sprays to cleanse or disinfect your device.
IMPORTANT We are unable to, and did not, determine whether any particular cleaning product is effective in removing specific foreign substances (including viruses) from the device, nor whether any disinfectant will remove all germs or viruses. Please consult the chemical manufacturers’ documentation for specifics on cleaning product efficacy with regards to foreign substances (such as viruses).
For more detailed information download the Motorola Solutions Technical Notification